Manual.ly Logo

Worx WG384E Rokasgramata

0,0 · 0 Vērtējumi

PDF rokasgrāmata · 88 lapas

Latviešu

M: QW-35-FL
lapa

/ 88

Loading...
c7b50bdbc36f698af3a7a103bdd313789403 page 13
19
Cordless Chain Saw
EN
wrap around saw handles. (See Fig. N)
(4) Make sure your footing is firm. Keep feet-shoulder
width apart. Distribute your weight evenly on both
feet.
(5) When ready to make a cut, push the lock-out
button completely in with the right thumb and
squeeze the trigger. This will turn saw on. Releasing
the trigger will turn the saw off. Make sure the saw
is running at full speed before starting a cut.
(6) When starting a cut, slowly place moving chain
against the wood. The wood should be as close to
the saw body as possible. Hold saw firmly in place
to avoid possible bouncing or skating (sideways
movement) of saw.
(7) Guide the saw using light pressure and do not put
excessive force on the saw, letting the saw do its
work. The motor will overload and can burn out.
It will do the job better and safer at the rate for
which it was intended.
(8) Remove the saw from a cut with the saw running
at full speed. Stop the saw by releasing the on/off
switch. Make sure the chain has stopped before
setting the saw down.
(9) Keep practicing on scrap logs in a secure working
area until you are comfortable, using a fluid
motion and a steady cutting rate.
Kickback Safety Devices On This Saw
This saw has a low-kickback chain and reduced
kickback Guide Bar. Both items reduce the chance of
kickback. However, kickback can still occur with this
saw.
The following steps will reduce the risk of kickback.
• Use both hands to grip saw while saw is running.
Use firm grip. Thumbs and fingers must wrap
around saw handles.
• Keep all safety items in place on saw. Make sure
they work properly.
• Do not overreach or cut above shoulder height.
• Keep solid footing and balance at all times.
• Stand slightly to the left side of saw. This keeps
your body from being in direct line with chain.
• Do not let Guide Bar nose touch anything when
chain is moving.
• Never try cutting through two logs at same time.
Only cut one log at a time.
• Do not bury the Guide Bar nose or try plunge cut
(boring into wood using guide bar nose).
• Watch for shifting of wood or other forces that
may pinch chain.
• Use extreme caution when reentering a previous
cut.
• Use only the low-kickback chain and guide
bar that were supplied with this Chainsaw or
recommended.
• Never use a dull or loose chain. Keep chain sharp
with proper tension.
How to use Saw Safely
1. Use the Chainsaw only with secure footing.
2. Hold the Chainsaw at the right-hand side of your
body (See Fig. O).
3. The chain must be running at full speed before it
makes contact with the wood.
4. Use the bumper spikes to secure the saw onto the
wood before starting to cut.
5. Use the Bumper Spikes as a leverage point while
cutting. (See Fig. P)
6. Do not operate the Chainsaw with arms fully
extended, attempt to saw areas which are difficult
to reach, or stand on a ladder while sawing (See
Fig. Q).
Never use the Chainsaw above shoulder height
Cutting wood under tension (See Fig. R)
WARNING: When cutting a limb that is
under tension, use extreme caution. Be
alert for wood springing back. When wood
tension is released, limb could spring back and
strike operator causing severe injury or death.
When sawing logs supported on both ends, start
the cut from above(Y) about 1/3 of the diameter into
the log (overbuck) and then finish the cut (Z) from
below, in order to avoid contact of the Chainsaw with
the ground. When sawing logs supported on only
one end, start the cut from below (Y) about 1/3 of
the diameter into the log (underbuck) and finish the
cut from above (Z) in order to avoid log splitting or
jamming of the Chainsaw.
SAW MAINTENANCE
Follow maintenance instructions in this manual.
Proper cleaning of saw and chain and Guide Bar
maintenance can reduce chances of kickback. Inspect
and maintain saw after each use. This will increase the
service life of your saw.
NOTE: Even with proper sharpening, risk of kickback
can increase with each sharpening.
MAINTENANCE AND
STORAGE OF Chainsaw
1. Remove the battery pack
• When not in use
• Before moving from one place to another
• Before servicing
• Before changing accessories or attachments, such
as saw chain and guard
2. Inspect Chainsaw before and after each use.
Check saw closely if guard or other part has been
damaged. Check for any damage that may affect
operator safety or operation of saw. Check for
alignment or binding of moving parts. Check for
broken or damaged parts. Do not use Chainsaw if
damage affects safety or operation. Have damage
repaired by authorized service center. To locate an
authorized service center, visit www.worx.com.
3. Maintain Chainsaw with care.
• Never expose saw to rain or direct moisture.
• Keep chain sharp, clean, and lubricated for better
and safer performance.

Sarunājieties ar savu Worx WG384E rokasgrāmatu, izmantojot AI

Saņemiet tūlītējas AI atbildes no savas Worx WG384E rokasgrāmatas

Jautājiet ko vien vēlaties par Worx WG384E. Atbildes nāk no šīs rokasgrāmatas, norādot lapas, uz kurām tās balstītas.

WG384E Apkopes grafiks

Pēc katras lietošanas reizes
Apsekojiet un notīriet zāģi

Noņemiet akumulatora iepakojumu. Pārbaudiet, vai nav bojājumu, novirzes vai saskares. Notīriet zāģskaidas no vadotnes stieņa un zobrata atveres.

Katru reizi, kad ķēde tiek noņemta
Notīriet vadotnes stieņa sliedes

Izmantojiet drāts suku vai līdzīgu instrumentu, lai noņemtu nogulsnes no stieņa iekšējās rievas un rūpīgi iztīrītu eļļas kanālus.

Katru reizi, kad ķēde tiek uzasināta
Pārbaudiet vadotnes stieņa stāvokli

Pārbaudiet vadotnes stieni, lai noteiktu nodilumu, liekumus, plaisas vai pārmērīgu sakaršanu/virsas raupjumu. Nomainiet, ja ir bojāts.

Regulāri intervāli
Pārbaudiet ķēdes bremzes darbību

Veiciet funkcijas pārbaudi, aktivizējot un deaktivizējot ķēdes bremzi, izmantojot priekšējo rokturi.

Pirms sākot darboties un regulāri darbības laikā
Pārbaudiet eļļas līmeni

Pārbaudiet eļļas līmeņa lodziņu pirms sākot darboties un regulāri darbības laikā. Papildiniet, ja tas ir zems.

Ik pēc 10 minūtēm darbības laikā
Pārbaudiet jaunās ķēdes spriegumu

Ja ķēde nesen tika nomainīta, pārbaudiet tās spriegumu ik pēc 10 minūtēm darbības laikā.

Kad nepieciešams (kad sausa)
Uzasiņojiet vai nomainiet zāģķēdi

Saglabājiet ķēdi asu. Ja griešana rada tikai zāģskaidas vai prasa piespiešanu, uzasiņojiet vai nomainiet ķēdi.

M: qwen/qwen3.8-flash

Uzdot Jautājumu

0/1000

Vai jūs ieteiktu WG384E?

Jā Nē

Biežāk uzdotie Jautājumi

A

Nē, Worx WG384 prasa divus akumulatoru blokus, lai darbotos. Mašīna nesāksies, ja abi akumulatoru sloti nav piepildīti ar saderīgiem 20V Max akumulatoriem.

Vai šī atbilde bija noderīga?

A

Ja ķēdi var pacelt vairāk nekā par pusi no vadības saites dziļuma no vadu sliedes, tā ir pārāk vaļīga. Jaunām ķēdēm ātri stiepjas, tāpēc bieži pārbaudiet sasprindzinājumu pirmajās lietošanas reizēs.

Vai šī atbilde bija noderīga?

A

Jums jāizmanto standarta vadu un ķēdes eļļa (ISO VG32). Nelietojiet pārstrādātu eļļu vai motora eļļu, jo tas var bojāt automātisko eļļotāju un anulēt garantiju.

Vai šī atbilde bija noderīga?

A

Absolūti nē. Roksts stingri brīdina pret ķēdesdzirnavu lietošanu koka zaros. Vienmēr stāviet uz cietas, līdzenas zemes, lai nodrošinātu stabilitāti un drošību.

Vai šī atbilde bija noderīga?

A

Darbības laiks mainās atkarībā no griešanas intensitātes, bet pilna uzlāde parasti ilgst aptuveni 12 minūtes nepārtrauktas griešanas. Divu akumulatoru izmantošana palīdz pagarināt kopējo darba laiku.

Vai šī atbilde bija noderīga?

A

Nē, šīs ķēdesdzirnavas ir paredzētas tikai koka griešanai. To lietošana uz plastmasas, būvmateriāliem vai citiem nekoksnes materiāliem ir bīstama un var izraisīt smagus bojājumus instrumentam.

Vai šī atbilde bija noderīga?

M: QW-35-FL

Priekšrocības un Mīnusi

Priekšrocības

  • Saderīgs ar visiem WORX 20V Max PowerShare akumulatoriem maksimālai elastībai
  • Automātiskā ķēdes eļļošanas sistēma samazina apkopi un pagarina ķēdes kalpošanas laiku
  • Integrēta ķēdes bremze nodrošina tūlītēju drošības aizsardzību pret atsitieniem
  • Viegls dizains pie 3,9 kg padara to viegli manevrējamu un pārvietojamu
  • Skaidrs eļļas līmeņa logs ļauj ātri un viegli monitorēt smērvielas līmeni
VS

Trūkumi

  • Prasa divus akumulatorus darbībai, kas var palielināt sākotnējās iestatīšanas izmaksas
  • Ķēdes sasprindzinājums jāpārbauda bieži, jo jaunām ķēdēm ātri stiepjas
  • Nav piemērots minerālmateriālu vai nekoksnes būvelementu griešanai
  • Akumulatora darbības laiks ir atkarīgs no slodzes intensitātes un var prasīt rezerves paketes lielām darba vietām
  • Eļļas tvertņu kapacitāte ir ierobežota līdz 150 ml, prasa biežu papildināšanu smagos uzdevumos
M: QW-35-FL

Produkts Specifikācija

Tips

Zāģķēde

Bāzes garums

35 cm

Ķēdes ātrums

8 m/s

Ķēdes solis

9,5 mm

Eļļas tvertnes tilpums

150 ml

Funkcijas

Akumulatora līmeņa indikators, papildu rokturis, bezsukņu motors, ķēdes spriegošana bez rīkiem, automātiska ķēdes eļļošana, ķēdes bremze, naglu ierobežotājs

Vibrācijas līmenis

2,6 m/s²

Troksnes emisija

96 dB(A)

M: QW-35-FL

Produkts Apraksts

Worx WG384 40V PowerShare ķēdesdzirnavu pārskats

Worx WG384 40V PowerShare ķēdesdzirnavas ir daudzpusīgs bezvadu instruments, kas paredzēts mājsaimniekiem un profesionāļiem, kuriem nepieciešama uzticama koka griešanas jauda bez vadu vai benzīna apgrūtinājumiem. Šis akumulatora dzirnavu komplekts ir aprīkots ar spēcīgu 40 voltu sistēmu, ko baro divi 20V Max litija jonu akumulatori, nodrošinot augstu veiktspēju koku ciršanai, zaru atzarošanai un baļķu malkošanai. Ar 14 collu vadošo sliedi un ķēdes ātrumu 8 metri sekundē tas nodrošina efektīvus griezienus dažādās koka šķirnēs.

Viens no izciliem šo ķēdesdzirnavu aspektiem ir to saderība ar Worx PowerShare ekosistēmu. Lietotāji var izmantot jebkuru 20V Max WORX akumulatoru, piedāvājot elastību un ērtības tiem, kuriem jau ir citi instrumenti no šīs līnijas. Ierīce ietver automātisko eļļošanu, lai noturētu ķēdi eļļotu darbības laikā, samazinot nolietošanos un uzturot drošību. Drošība ir prioritāte ar ķēdes bremzi, kas aktivizējas tūlīt pēc atsitiena, aizsargējot operatoru no pēkšņa atsitaiena.

Ergonomiskais dizains nodrošina komfortu ilgstošas lietošanas laikā. Priekšējā rokturis un aizmugurējā roktura daļa ir novietoti optimālai kontrolei, ļaujot lietotājiem saglabāt stingru turēšanu pat pie grūtiem kokmateriāliem. Instruments arī ir aprīkots ar skaidru eļļas līmeņa logu, padarot viegli monitorēt šķidruma līmeni pirms un darba laikā. Neatkarīgi no tā, vai jūs tīrāt postkara atkritumus vai gatavojat malku, Worx WG384 piedāvā tīru, klusu un spēcīgu risinājumu.

Svarīgas piezīmes

  • Vienmēr valkājiet aizsardzības aprīkojumu, ieskaitot acu aizsardzību un ausu aizsardzību.
  • Pārliecinieties, ka ķēde ir pareizi saspringta pirms katras lietošanas reizes, lai novērstu nelaimes gadījumus.
  • Uzlādējiet abus akumulatorus vienlaikus, lai iegūtu līdzsvarotu jaudas izvadi.
  • Nekad neoperējiet dzirnavas virs plecu līmeņa vai uz nestabilām virsmām, piemēram, kāpnēm.
M: QW-35-FL

© Copyright 2026 Manual.ly