Manual.ly Logo

Bosch DIY EasyDrill 1200 Rokasgramata

0,0 · 0 Vērtējumi

PDF rokasgrāmata · 215 lapas

Latviešu

M: OA-GPT-54-NAN
lapa

/ 215

Loading...
373598f794fee1c172941749f256260fbe1b page 11
English | 17
Operation
Starting Operation
Inserting the battery
Note: The use of batteries unsuitable for your power tool can
lead to malfunctions or damage to the power tool.
Set the rotational direction switch (6) to the middle position
to avoid unintentionally switching it on. Insert the charged
battery (8) into the handle until you feel it engage and it is
flush with the handle.
Setting the rotational direction (see figureC)
The rotational direction switch (6) is used to change the ro-
tational direction of the power tool. However, this is not pos-
sible while the on/off switch (10) is being pressed.
Right rotation: To drill and to drive in screws, press the ro-
tational direction switch (6) through to the left stop.
Left Rotation: To loosen and unscrew screws and nuts,
press the rotational direction switch (6) through to the right
stop.
Setting the Operating Mode
Drilling
EasyDrill 1200:
Set the torque presetting ring(3) to the
"drilling" symbol.
EasyImpact 1200:
Set the operating mode presetting ring(4) to
the "drilling" symbol.
Screwdriving
EasyDrill 1200:
Set the torque presetting ring(3) to the re-
quired torque.
EasyImpact 1200:
Set the operating mode presetting ring(4) to
the "screwdriving" symbol.
Set the torque presetting ring(3) to the re-
quired torque.
Impact drilling
EasyImpact 1200:
Set the operating mode presetting ring(4) to
the "impact drilling" symbol.
Preselecting the Torque
The torque presetting ring (3) can be used to preselect the
required torque in 20 stages. When the correct setting is
used, the application tool will be stopped when the screw is
driven flush into the material or once the set torque has been
reached. In position the overload clutch is deactivated,
e.g. for drilling.
When unscrewing screws, you can select a higher setting or
set the tool to the symbol.
Adjusting the Speed
You can adjust the speed of the power tool when it is on by
pressing in the on/off switch (10) to varying extents.
A light pressure on the on/off switch (10) results in a low ro-
tational speed. Increased pressure on the switch causes an
increase in speed.
Adjusting the Speed/Impact Rate (EasyImpact1200)
You can adjust the speed/impact rate of the power tool when
it is on by pressing in the on/off switch (10) to varying ex-
tents.
Applying light pressure to the on/off switch (10) results in a
low rotational speed/impact rate. Applying increasing pres-
sure to the switch increases the speed/impact rate.
Mechanical gear selection
u Only operate the gear selector (5) when the power
tool is not in use.
You can preselect two speed ranges with the gear selector
(5).
Gear I:
Low speed range; for screwdriving or working with a large
drilling diameter.
Gear II:
High speed range; for working with a small drilling diameter.
If the gear selector switch (5) cannot be pushed all the way,
turn the tool holder (1) with the application tool slightly.
Switching on/off
To start the power tool, press and hold the on/off switch
(10).
The lamp (11) lights up when the on/off switch (10) is lightly
or fully pressed, meaning that the work area is illuminated in
poor lighting conditions.
To switch off the power tool, release the on/off switch (10).
Fully automatic spindle lock (Auto-Lock)
The drill spindle, and therefore the tool holder(1), are
locked when the on/off switch (10) is not pressed.
This enables screws to be screwed in even when the battery
(8) is empty and allows the power tool to be used as a
screwdriver.
Run-out brake
Upon releasing the on/off switch (10), the drill chuck is
slowed down, which prevents the application tool from con-
tinuing to rotate.
When driving in screws, you should therefore only release
the on/off switch (10) once the screw has been inserted
flush into the workpiece. This way, the head of screw will not
penetrate the workpiece.
Temperature-dependent overload protection
In normal conditions of use, the power tool cannot be over-
loaded. In the event of heaving loading or the temperature
rising/falling outside the permitted battery temperature
range, the speed will be reduced. The power tool will not run
at full speed again until the permitted battery temperature
has been reached.
Bosch Power Tools 1 609 92A 7WD | (20.06.2022)

Sarunājieties ar savu Bosch DIY EasyDrill 1200 rokasgrāmatu, izmantojot AI

Saņemiet tūlītējas AI atbildes no savas Bosch DIY EasyDrill 1200 rokasgrāmatas

Jautājiet ko vien vēlaties par Bosch DIY EasyDrill 1200. Atbildes nāk no šīs rokasgrāmatas, norādot lapas, uz kurām tās balstītas.

EasyDrill 1200 Apkopes grafiks

Pēc ilgstošas lietošanas ar zemu ātrumu
Izdzesēt instrumentu

Pēc ilgstošas darba pie zema ātruma ieslēdziet instrumentu maksimālajā ātrumā bez slodzes uz aptuveni 3 minūtēm, lai to izdzesētu.

Pirms katra lietojuma vai pēc nepieciešamības
Pārbaudīt kustīgās daļas un stāvokli

Pirms lietošanas pārliecinieties, ka kustīgās daļas darbojas pareizi bez ieķeršanās un ka nav salauztu vai bojātu daļu.

Pēc nepieciešamības
Notīrīt instrumentu un ventilācijas spraugas

Uzturiet elektroinstrumentu un ventilācijas spraugas tīras, lai nodrošinātu drošu un efektīvu darbību.

M: QW-35-FL

Uzdot Jautājumu

0/1000

Vai jūs ieteiktu EasyDrill 1200?

Jā Nē

Biežāk uzdotie Jautājumi

A

Šis bezvadu urbis ir paredzēts urbšanai kokā, metālā, keramikā un plastmasā. Tas nav aprīkots triecienurbšanai mūrī, piemēram, ķieģeļos vai akmenī.

Vai šī atbilde bija noderīga?

A

Atrodiet rotācijas virziena slēdzi roktura augšdaļā. Slīdiet to pilnībā pa kreisi pulksteņrādītāja virzienā (skrūvju pieskrūvēšana) vai pilnībā pa labi pretēji pulksteņrādītāja virzienam (skrūvju atskrūvēšana).

Vai šī atbilde bija noderīga?

A

Jā, izvēloties atbilstošo griezes momenta iestatījumu uz priekšiestatījuma gredzena. Lielām skrūvēm cietos materiālos ir ieteicama iepriekšēja pilotcauruma urbšana, lai novērstu plaisāšanu.

Vai šī atbilde bija noderīga?

A

Produkts parasti tiek piegādāts ar daļēji uzlādētu litijskābes akumulatoru. Ir ieteicams to pilnībā uzlādēt pirms pirmās lietošanas, lai nodrošinātu maksimālu veiktspēju.

Vai šī atbilde bija noderīga?

A

Pārnesumkārbiņas pārslēdzējs ļauj jums izvēlēties starp diviem ātruma diapazoniem. Pārnesums I ir zems ātrums un liels griezes moments, ideāli skrūvēšanai. Pārnesums II ir augsts ātrums, piemērots mazu caurumu urbšanai.

Vai šī atbilde bija noderīga?

A

Bosch akumulatori parasti nāk ar specifisku garantijas periodu. Lūdzu, pārbaudiet iepakojumu vai oficiālo tīmekļa vietni precīzam laikam, kas piemērojams jūsu reģionā.

Vai šī atbilde bija noderīga?

M: QW-35-FL

Priekšrocības un Mīnusi

Priekšrocības

  • Viegls un ergonomisks dizains ērtai lietošanai
  • Divpakāpju kārba piedāvā daudzpusību urbšanai un skrūvēšanai
  • Integrēta LED lampas uzlabo redzamību telpās
  • Atslēgas vārpstas turētājs ļauj ātri un viegli mainīt urbja galviņas
  • Elektroniskā šūnas aizsardzība novērš akumulatora dziļu izlādi
VS

Trūkumi

  • Nav piemērots smagajai mūra urbšanai bez trieciena funkcijas
  • Akumulatora kapacitāte var būt nepietiekama ļoti ilgiem nepārtrauktiem darbiem
  • Momenta limits var būt zemāks nekā profesionālās klases modeļiem
M: QW-35-FL

Produkts Specifikācija

Veids

Skrūvgriezis

M: QW-35-FL

Produkts Apraksts

Atklājiet Bosch DIY EasyDrill 1200 jaudu

Bosch DIY EasyDrill 1200 bezvadu urbjskrūvgriezis ir precīzas inženiertehnoloģijas piemērs, kas izveidots īpaši mājokļa uzlabošanas entuziastiem. Šis universālais rīks apvieno uzticamību ar vieglu lietošanu, padarot to par neatņemamu papildinājumu jebkuram DIY rīku komplektam. Vai jūs salabojat mēbeles, karājat plauktus vai veicat nelielus remontdarbus mājās, šis urbjskrūvgriezis nodrošina konsekventu darbību bez vadu traucējumiem.

Tā darbības pamatā ir robusta 12 voltu litijskābes akumulatora sistēma. Šī barošanas avota nodrošina, ka rīks paliek viegls, taču pietiekami spēcīgs dažādu uzdevumu veikšanai. Ergonomiskais dizains ietver izolētu rokturi, kas uzlabo lietotāja drošību un komfortu ilgstoša darba laikā. Izceļas integrētā PowerLight, kas apgaismo darba zonu tumšos stūros, nodrošinot precizitāti pat sarežģītās vidēs.

EasyDrill 1200 piedāvā divu ātrumu režīmus, ļaujot lietotājiem pāriet no zema momenta skrūvēšanas pielietojumiem uz augstu ātrumu urbšanai kokā, metālā, keramikā un plastmasā. Regulējams griezes moments nodrošina 20 dažādus iestatījumus, dodot jums precīzu kontroli pār skrūves pieskrūvēšanas stiprumu, novēršot materiālu bojājumus vai skrūvju galvu izslīdēšanu. Turklāt atslēgas vārpstas turētājs ļauj ātri un bez rīkiem mainīt urbja galviņas, ievērojami vienkāršojot jūsu darba plūsmu.

Drošība ir prioritāte šī ierīces dizainā. Tā ietver temperatūras atkarīgu pārslogojuma aizsardzības sistēmu, kas automātiski samazina ātrumu, ja motors kļūst pārāk karsts, aizsargājot gan rīku, gan lietotāju. Automātiskā vārpstas fiksācija notur vārpstas turētāju nekustīgi, kad trigeris tiek atlaidīts, padarot urbja galviņu maiņu drošāku un vieglāku. Ar šiem pārdomātiem funkcijām Bosch DIY EasyDrill 1200 rokasgrāmata vada lietotājus caur drošu un efektīvu darbību katru reizi.

Svarīgas piezīmes

  • Vienmēr noņemiet akumulatoru pirms aksesuāru maiņas.
  • Nēsājiet atbilstošus acu aizsargbrilles urbšanas laikā.
  • Pārliecinieties, ka darba gabals ir droši nostiprināts pirms sākuma.
  • Izmantojiet tikai ieteiktos lādētājus optimālai akumulatora dzīvei.

Priekšrocības

  • Viegls un ergonomisks dizains ērtai lietošanai.
  • Divpakāpju kārba piedāvā daudzpusību urbšanai un skrūvēšanai.
  • Integrēta LED lampas uzlabo redzamību telpās.
  • Atslēgas vārpstas turētājs ļauj ātri un viegli mainīt urbja galviņas.
  • Elektroniskā šūnas aizsardzība novērš akumulatora dziļu izlādi.

Trūkumi

  • Nav piemērots smagajai mūra urbšanai bez trieciena funkcijas.
  • Akumulatora kapacitāte var būt nepietiekama ļoti ilgiem nepārtrauktiem darbiem.
  • Momenta limits var būt zemāks nekā profesionālās klases modeļiem.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly